CONTENTS
Section Heading Page
INSTALLER GUIDE 4 - 26
OWNER GUIDE 27 - 39
1 SAFETY 6
2 LIST OF ACCESSORIES 6
3 APPLIANCE DATA 7
4 GENERAL INSTALLATION REQUIREMENTS 8
5 PRE-INSTALLATION PREPARATION 14
5.1 Unpacking. 14
5.2 Fireplace flue pull. 15
5.3 Appliance preparation. 15
5.4 Fitting the battery to electronic ignition models. 15
5.5 Checking the ignition. 15
5.5.1 Manual ignition. 15
5.5.2 Electronic ignition. 16
5.6 Fitting the closure plate. 16
6 APPLIANCE INSTALLATION 18
6.1 Installing to a hearth. 18
6.2 Wall mounting. 18
6.3 Gas supply connection. 18
6.4 Radiants installation. 18
6.5 Flue restrictor adjustment. 19
7 CONTROL AND PRESSURE CHECKS 20
7.1 Check control settings. 20
7.2 Flame supervision and spillage monitoring system. 20
7.3 Check reference pressure. 21
8 FASCIA FITTING 21
9 SPILLAGE CHECK 22
10 FINAL REVIEW 23
11 SERVICING AND PARTS REPLACEMENT 24
11.1 To remove the fascia. 24
11.2 To replace radiant(s). 24
11.3 To replace the pilot unit. 24
11.4 To remove the piezo generator (Manual ignition models). 25
11.5 Note for electronic ignition. 25
11.6 To remove the complete burner module, pipes and pilot. 25
11.7 To grease the gas tap. 26
INSTALLER GUIDE
Page 5
© Baxi Heating U.K. Limited 2008.
To Next Page
Loading...
