6.2 Appliance disassembly.
6.2.1 Fascia removal on the Masquerade/Excelsior and Dream models
(See figure 7).
- Remove the two screws securing the bottom of the fascia to the sides of the
convection box.
- Raise the fascia to allow the retaining lugs at the top to clear the slots in the
convection box hood and then lift clear.
- Place the fascia in a safe place away from your immediate work area.
Page 19
© GDC Group Ltd. 2014
INSTALLER GUIDE
Figure 7. Fascia removal
(Fascia may differ from
that shown)l
To Next Page
Loading...