Valor 541 - Installer Guide

Section Heading Page
9. FLUE TERMINAL INSTALLATION 26
9.1 Cutting flue to size. 26
9.2 Fitting to wall. 28
9.3 Fitting the terminal guard. 29
10. GAS CONNECTION 29
11. CERAMIC COALS INSTALLATION 30
12. CERAMIC PEBBLES INSTALLATION 32
13. WINDOW FITTING 34
14. FULL OPERATING CHECKS 34
14.1 Check for leaks. 34
14.2 Check control operation. 34
14.3 Checking inlet pressure. 35
15. FASCIA FITTING 36
15.1 Fitting the Masquerade fascia 36
15.2 Fitting the Excelsior fascia. 37
15.3 Fitting the Dream fascia. 38
16. FINAL REVIEW 39
17. SERVICING & PARTS REPLACEMENT 40
17.1 To remove the fascia. 40
17.2 To remove or clean the window unit. 42
17.3 To remove the ceramic fuel effect and rear wall. 43
17.4 To replace the ceramic fuel effect. 43
17.5 To remove the complete burner module. 43
17.6 To remove the burner from the burner module. 44
17.7 To remove the injector. 44
17.8 To remove the pilot unit. 44
17.9 To remove the gas valve. 45
17.10 To remove the switch and wiring loom. 45
Page 6
© GDC Group Ltd. 2014
INSTALLER GUIDE
CONTENTS (Continued)