Valtra Q Series User Manual

RANGE CHANGE
1.
Push the button
+
to shift from A to B.
2.
Push the button
–
to shift from B to A.
Change the ranges only when there is no load on
the transmission - and never when driving uphill
or downhill!
Use always range A for eld work – and use range
B for higher speed transport .
Anyhow you can start to drive with range B – even
with heavy trailer - already from eld. No need to
start to pull with A.
VALTRA EXPERT TIP
13
Q Series Quick Guide

Valtra Q Series Specifications

General

Engine Power	230-305 hp
Wheelbase	3, 050 mm
Transmission	CVT
Engine	AGCO Power
Rear lift capacity	10, 000 kg
Front lift capacity	5, 000 kg
Engine Type	6-cylinder
Hydraulic pump	200 l/min
Lift Capacity	10, 000 kg (rear)
Hydraulic System	Load-sensing