ENGINE SPEED MEMORY
1.
Go to the engine screen via the engine button.
2.
From here, preset Memo 1 and 2. Change the value by selecting the appropriate memory
and sliding it to the correct position or use the encoder wheel.
3.
Alternatively, set the engine speed cruise directly to the speed currently in use by pressing
the engine speed memory buttons 1 or 2 for 3 seconds.
4.
Push the engine RPM cruise control to engage and disengage the RPM memory function.
Engine speed memory is also available via the headland management.
This memory function reduces unnecessarily high rpm at the headland.
VALTRA EXPERT TIP
17
Q Series Quick Guide
To Next Page
Loading...
