3.8.15.4 Programming the engine speed cruise control
GUID-FC2D34C7-2836-44A6-893A-C0B821296F4A
1. Hand throttle
2. Adjustment wheel
3. Engine RPM memory button
1. Set the engine speed.
Use the drive pedal or the hand throttle to set the desired engine speed
value.
2. Press the engine RPM memory button shortly.
The setting is activated and stored in the memory. The indicator light is
continuously lit. When the engine speed cruise control is activated, you can
adjust the stored value with the adjustment wheel.
NOTE: If the engine speed cruise control is active, the driving speed cruise
control does not activate. The engine speed cruise control has the priority
over the driving speed cruise control, so if the driving speed cruise control is
active and you activate the engine speed cruise control, the driving speed
cruise control deactivates.
3.8.15.5 Activating and deactivating the engine speed cruise control
NOTE: Control the position of the hand throttle before deactivating the cruise
control.
3. Operation
- 142 -
To Next Page
Loading...
Need help?
General