10. Check the oil level from the dipstick.
The oil is filled until the upper mark on the dipstick is reached.
11. Wipe off any oil which has run out onto the chassis.
12. Start the engine.
13. Run the engine and check for possible leaks.
14. Run the engine for a while and check the oil level.
4.7.4.3 Changing the cab ventilation air filter
Change the cab ventilation air filter periodically.
GUID-3C12D6DA-B2B1-48DC-B0E7-9B11AFE796CC
1. Air filter housing hatch
2. Ventilation air filter support frame
3. Ventilation air filter support frame latch
1. Open the air filter housing from the upper left-hand corner of the cab roof.
2. Open the support frame latch.
3. Extract the support frame.
• Lower the support frame slightly.
• Pull the support frame outwards.
4. Replace the ventilation air filter with a new one.
Change ventilation air filter more often if necessary.
5. Insert the support frame.
• Push the support frame into the air filter housing.
• Raise the support frame slightly.
6. Close the support frame latch.
7. Close the air filter housing.
4. Maintenance
- 374 -
To Next Page
Loading...
Need help?
General