9. Set the cruise control values.
When the engine has started the cruise control pop-up view is displayed.
Cruise
2
13.0
13 °C
C3
A5
1
Cruise
P
AUTO 1
N
Cruise
000
Cruise
GUID-B95BC766-BA79-4531-8739-1425E774606E
• Press the OK button or the selector for the predefined factory/user
settings shortly to restore the previously saved cruise control values.
NOTE: If you do not press any button within 15 seconds after starting the
engine, the previously saved cruise control values will be restored.
OR
• Press the right arrow button shortly to select the cruise control value
reset function.
• Press the OK button or the selector for the predefined factory/user
settings shortly to set the cruise control values to zero.
10. Use the driving pedal to control the engine speed.
IMPORTANT: Never race a cold engine.
After starting a cold engine, the glow indicator light
can light up again. The
afterglow reduces white smoke and keeps the cold engine running smoothly.
3.3.2 Starting under cold conditions
To ensure a successful start under cold conditions, use the engine heater or fuel-
operated heater and follow the instructions given.
IMPORTANT: It is recommended to use the engine heater or fuel-operated
heater when the temperature is below 0°C.
IMPORTANT: If you are driving the tractor for a short distance only, make sure
that the battery is charged enough to ensure starting.
NOTE: Use of the engine heater or fuel-operated heater reduces the wear on the
engine.
• When cold-starting the engine, turn off all unnecessary equipment that uses
electrical power.
3. Operation
- 89 -
To Next Page
Loading...
Need help?
General