2. Disconnect the water detector wire.
3. Place a suitable container under the filter.
IMPORTANT: Do not drain fuel onto the ground!
4. Remove the filter.
IMPORTANT: Unscrew the filter by hand, do not use a filter wrench.
5. Move the water detector from the old filter to the new filter.
6. Lubricate the O-rings with fuel.
7. Fill the new filter with fuel.
Pour the fuel into the filter outer shell.
8. Attach the filter.
9. Connect the water detector wire.
Bleed the fuel system.
4.7.5.6 Changing engine air filters
Change the main air filter and safety filter periodically.
GUID-E4D40011-78C9-461A-A7AC-5234502A3B76
1. Main air filter
2. Safety air filter
The safety filter protects the engine if the main air filter gets damaged.
IMPORTANT: Never run the tractor without the safety filter.
NOTE: Do not clean the filters. Always change the filters according to the
maintenance schedule.
4. Maintenance
- 408 -
To Next Page
Loading...
Need help?
General