• To lock the equipment to the loader frame:
• Simultaneously press the button for hydraulic implement locking and the
lower joystick push button, and move the joystick to the left.
• To release the equipment from the loader frame:
• Simultaneously press the button for hydraulic implement locking and the
lower joystick push button, and move the joystick to the right.
3.18.5 Controlling the extra cylinder with the change valve
You can open and close for example the bale grip using the change valve.
GUID-8BAF3FEE-3898-414F-A77C-559DA481722F
1. Lower joystick push button
2. Joystick
• To close, simultaneously press the lower joystick push button and move the
joystick to the left.
• To open, simultaneously press the lower joystick push button and move the
joystick to the right.
3.19 Power take-off
3.19.1 Attaching implements to the power take-off
Before attaching implements to the tractor power take-off (PTO), make sure the
implement is designed for the used PTO speed (540 rpm or 1 000 rpm).
CAUTION: Observe all safety precautions in any operation involving
implements driven by the PTO.
WARNING: Stop the engine and disengage the PTO before attaching
any implement to the tractor. Check that the implement's working area
is clear before engaging the PTO.
3. Operation
- 263 -
To Next Page
Loading...
Need help?
General