LTCA-10/LTCA-40 USER’S MANUAL
25
only save the current test results and discard any previous data from the working
memory.
In either case, press the [ENTER] key and continue to step n.
2. NO
If you do not wish to save the reading, press the [2] key (NO) and continue to
step n.
n. The “RUN ANOTHER TEST?” menu will be displayed:
1. YES
If you would like to run another test, press the [1] key (YES) and return to step
c.
2. NO
If you do not wish to run another test, press the [2] key (NO) and continue to
step o.
o. The “SAVE THIS RECORD?” menu will be displayed:
NOTE
The test record must be saved to Flash EEPROM so that it can be recalled and
printed at a later time.
1. YES
If you wish to save the record, press the
[1] key (YES) and continue to step p.
2. NO
If you do not wish to save the record, press the
[2] key (NO). The following
message will be displayed:
Press the [1] key (DO NOT SAVE RECORD) if you do not want to save the
record. You will be returned to the “START-UP” menu.
Press the [2] key (SAVE RECORD) to save the record. Continue to step p.
ARE YOU SURE?
DATE WILL BE LOST!
1. DO NOT SAVE RECORD
2. SAVE RECORD
SAVE THIS RECORD?
1. YES
2. NO
RUN ANOTHER TEST?
1. YES
2. NO
To Next Page
Loading...
Need help?
General
