Do you have a question about the Vanguard Instruments WRM-10P and is the answer not in the manual?
Model | WRM-10P |
---|---|
Operating Temperature | 0°C to 50°C |
Storage Temperature | -20°C to 70°C |
Accuracy | ±0.1% of reading |
Interface | USB |
Measurement Range | 0.1Ω to 2000Ω |
Resolution | 0.1 μΩ |
Display | LCD |
Test Current | 1mA |
Weight | 12 lbs (5.4 kg) |
Describes the WRM-10P/40 as microprocessor-controlled winding resistance meters for various applications.
Explains the operation of WRM-10P/40 based on Ohm's law and its current source capabilities.
Lists the standard accessories included with the WRM-10P/40 unit.
Explains how to select operating voltages (90-130Vac or 200-240Vac) using terminal block jumpers.
Provides instructions on how to adjust the brightness of the device's LCD screen.
Details the procedure for advancing or retracting the thermal printer paper.
Shows typical connection diagrams illustrating how to connect the WRM-10P/40 to a transformer for testing.
Outlines initial operational steps such as grounding the unit, connecting power, and inserting test cables.
Details the sequence of operations for performing tests, starting from the device's main Start-Up menu.
Guides the user through entering essential transformer identification data such as company, station, and model numbers.
Details the process for retrieving previously saved test records from the device's Flash EEPROM.
Explains how to view saved test records either on the LCD screen or by printing them.
Describes the procedure for printing a list of all test records currently stored in the device's memory.
Provides instructions for deleting either a single specified test record or all saved records.
Explains how to connect the WRM-10P/40 to a PC via RS-232C for retrieving test data.
Covers the procedure for setting the device's internal clock, including date and time adjustments.
Details how to perform a specific test on the regulating tap switch for continuity and detect breaks.