EasyManuals Logo

Vanguard Instruments WRM-10P User Manual

Vanguard Instruments WRM-10P
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
WRM-10P/WRM-40 OPERATING INSTRUCTIONS
5
2.0 WRM-10P/40 SPECIFICATIONS
Table 1.0 WRM-10P/40 SPECIFICATIONS
TYPE Special-purpose test equipment, portable, micro-ohmmeter
SIZE (inches) 16.8 wide by 12.6 high by 10.6 deep (WRM-10P)
17.5 wide by 13.2 high by 11.0 deep (WRM-40)
WEIGHT Less than 27 pounds (WRM-10P)
Less than 32 pounds (WRM-40)
RESISTANCE 1 micro-ohm to 2000 ohms (WRM-10P)
1 micro-ohm to 500 ohms (WRM-40)
TEST CURRENT 10 amperes max (WRM-10P)
40 amperes max (WRM-40)
TEST VOLTAGE 36 Vdc
DISPLAY LCD, back-lighted, 4-line by 20-character
PRINTER 2.5-inch wide thermal printer
ACCURACY ± 1 % reading, ± 1 count
POWER (WRM-10P) 4 amps, 90-120 / 200-240 V ac (selectable), 50/60 Hz
(WRM-40) 8 amps, 90-120 / 200-240 V ac (selectable), 50/60 Hz
SERIAL INTERFACE RS-232C connector port
ENVIRONMENT Operating: 0°C to 55°C; Storage: -40°C to 65°C
WARRANTY One-year parts & labor (post warranty service is available)
NOTE:
THE ABOVE SPECIFICATIONS ARE VALID AT NOMINAL OPERATING VOLTAGE AND AT A TEMPERATURE OF 25?C (77?F)
WRM-10P/40? SPECIFICATIONS MAY BE UPGRADED AND CHANGED WITHOUT PRIOR NOTICE.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vanguard Instruments WRM-10P and is the answer not in the manual?

Vanguard Instruments WRM-10P Specifications

General IconGeneral
BrandVanguard Instruments
ModelWRM-10P
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals