Vanguard Instruments LTCA-10 User Manual

LTCA-10/LTCA-40 USER’S MANUAL
54
5.8.5. Enabling the Computer Interface
The Computer Interface Mode is used to transfer test records from the LTCA-10/40’s Flash
EEPROM to a PC via the RS-232C or USB port. To use this mode, first run the provided PC
software and then connect the PC to the RS-232C or USB port on the LTCA-10/40. The software
will automatically make the connection to the LTCA-10/40.

Vanguard Instruments LTCA-10 Specifications

General

Brand	Vanguard Instruments
Model	LTCA-10
Category	Measuring Instruments
Language	English