LTCA-10/LTCA-40 USER’S MANUAL
56
5.8.7. Setting the Test Value Display Font
The font used to display test values on the screen can be made bold for better visibility. This only
affects the test values displayed during testing and does not affect any other text such as menu
items. Use the steps below to set the test value font.
a. Start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following menu will be displayed:
Press the [5] key (SET FONT)
c. The “SELECT TEST FONT” menu will be displayed:
1. NORMAL FONT
Press the [1] key (NORMAL FONT) to select the normal font. The screen will
return to the “START-UP” menu.
2. BOLD FONT
Press the
[2] key (BOLD FONT) to select the bold font. The screen will return to
the “START-UP” menu.
SELECT TEST FONT
1. NORMAL FONT
2. BOLD FONT
1. ENTER XFMR ID
2. PRINT RECORD
3. SAVE/RESTORE RECORD
4. SET TIME
5. SET FONT
1. TEST XFMR 03/04/09
2. SETUP 09:28:03
3. USER DIAG
To Next Page
Loading...
Need help?
General
