Vanguard Instruments LTCA-10 User Manual

LTCA-10/LTCA-40 USER’S MANUAL
39
NOTE
The test record must be saved to Flash EEPROM so that it can be recalled and
printed at a later time.
1. YES
If you wish to save the record, press the
[1] key (YES) and continue to step k.
2. NO
If you do not wish to save the record, press the [2] key (NO). The following
message will be displayed:
Press the [1] key (DO NOT SAVE RECORD) if you do not want to save the
record. You will be returned to the “START-UP” menu.
Press the [2] key (SAVE RECORD) to save the record. Continue to step k.
k. The following message will be displayed:
NOTE
The record number is automatically assigned and incremented by the LTCA-
10/40.
Press the [ENTER] key to return to the “START-UP” menu.
RECORD NUMBER 01
HAS BEEN SAVED!
ARE YOU SURE?
DATE WILL BE LOST!
1. DO NOT SAVE RECORD
2. SAVE RECORD

Vanguard Instruments LTCA-10 Specifications

General

Brand	Vanguard Instruments
Model	LTCA-10
Category	Measuring Instruments
Language	English