Need help?Do you have a question about the Vapro 5520 and is the answer not in the manual?
General| Brand | Vapro |
|---|---|
| Model | 5520 |
| Category | Measuring Instruments |
| Language | English |
Overview of the manual's purpose and how to use it for efficient operation and maintenance of the Vapro Osmometer.
Contact information and support details for Wescor, Inc., including phone, email, and website for assistance with the Vapro Osmometer.
Describes the Vapro osmometer's vapor pressure method, its advantages, and comparison to freezing point depression methods.
Explains the measurement principle of the Vapro osmometer, detailing the role of the thermocouple hygrometer and dew point depression.
Identifies and describes the function of the instrument's front panel controls, display, and rear panel ports and switches.
A step-by-step guide for initial setup, covering inspection of supplies, placement, power connection, and equilibration.
Lists all accessories and supplies provided with the Vapro Osmometer, including consumables and optional items.
Detailed instructions for unpacking, placing, powering, and achieving thermal equilibration of the Vapro Osmometer.
Information on the correct use of the micropipettor for sample aspiration, including sample volume considerations and avoiding contamination.
Guidance on properly opening and using Optimol ampule standards for accurate calibration of the Vapro Osmometer.
Instructions for using Osmocoll HNL serum control for quality assurance, including storage and preparation before use.
Step-by-step procedure to safely adjust the voltage selector on the Vapro Osmometer for different power sources.
Detailed instructions on how to access and replace the instrument's fuses, including necessary fuse specifications.
Explains the instrument's menus, modes (Normal, Average, Auto Repeat, Process Delay), and functions for sample analysis.
Critical instructions and cautions for accurately loading samples into the osmometer, emphasizing sample volume and avoiding contamination.
Procedures for cleaning the sample holder between measurements to prevent contamination and maintain accuracy.
How to perform the Clean Test to assess thermocouple contamination and verify instrument cleanliness.
Step-by-step guide for calibrating the Vapro Osmometer using standard solutions to ensure measurement accuracy.
Guidelines for leaving the instrument in standby mode and recommendations for maintaining thermal stability.
Details on connecting the Vapro Osmometer to external devices for data transfer, including port configuration and output format.
An overview of routine maintenance tasks for the Vapro Osmometer, focusing on the thermocouple head.
Step-by-step instructions for safely removing the thermocouple (TC) head assembly from the Vapro Osmometer.
Comprehensive instructions and materials needed for cleaning the thermocouple head to remove contaminants and ensure performance.
Procedures for correctly reinstalling the thermocouple (TC) head assembly after cleaning, ensuring proper calibration.
Explains the necessity of thermal equilibration after TC head reinstallation for accurate instrument calibration.
Methods for diagnosing and resolving persistent contamination issues with the thermocouple head, including advanced cleaning techniques.
A comprehensive guide to identifying and resolving common operational problems with the Vapro Osmometer, including a troubleshooting flowchart.
Discusses common issues with the thermocouple head, such as contamination, deformation, or connection problems, and their symptoms.
Identifies external factors like calibration standards, sampling technique, and environmental conditions that can impact measurement precision.
Guidance on identifying and addressing issues with a deformed or broken thermocouple, including restoration and replacement.
Detailed specifications for the Vapro Osmometer model 5520, covering sample volume, measurement range, and electrical properties.
Lists of available accessories, consumables, replacement parts, and documentation for the Vapro Osmometer.
Explanation of the scientific principles and measurement process behind the Vapro vapor pressure osmometry.
Guidance on using the Vapro Osmometer for specific applications like small samples, viscous fluids, and clinical research.
Explanation of Standard International (SI) units for osmolality and quality assurance of calibration solutions.
Technical details and pin configuration for connecting the Vapro Osmometer to printers or computers via serial port.
Instructions for changing language, measurement units, and running instrument self-tests via the setup menu.
To Next Page