Vari Lite VL1000 - Page 86

VARI❋LITE® - VL1000™ ERS LUMINAIRE USER’S MANUAL
68 11-Jun-02 02.9663.0001 B
Tilt/Encoder/Fail Tilt Encoder Failure Main board pan/tilt connector (J9)
disconnected
- Connect main board pan/tilt connector
(J9)
Tilt motor disconnected
- Connect tilt motor power
Encoder faulty
Replace pan end-of-travel/encoder
sensor assembly
Lamp/Strike/Fail Lamp Strike Failure Lamp failed to strike after repeated
attempts
- Replace lamp
Table A-1: Troubleshooting Guide (Continued)
Error Display Description Possible Cause and Remedy