9. Acquiring CBCT Images
106 vatech A9 (Model name: PHT-30CSS) User Manual
9.4.2 Chinrest position adjustment
Before patient alignment, adjust the Chinrest position to the CBCT mode. (If the
Chinrest position is already set to CBCT mode, there is no need to adjust again.)
The installation angle of the Chinrest attachment part may
be distorted by 2 degrees. This is intended for calibration
purposes.
1. Pull the Chinrest attachment part on the handle frame towards the machine until the
end of the Chinrest attachment part is printed in "-CBCT-" silk. Pull until you hear a
“click” sound.
2
O
To Next Page
Loading...
