3. Operation
EzRay Air (Model: VEX-P300) User Manual 29
ENGLISH
3.4 Exposure
The operator MUST instruct the patient to refrain from moving during
the entire exposure.
1. Instruct the patient not to move.
2. Press the Exposure Button for exposure duration.
3. While X-ray is being exposed,
The X-ray Exposure Indicator lights up and an audible sound is produced.
Keep pressing until the X-ray Exposure Indicator light goes out and the
audible sound stops.
Green: Ready Yellow: X-ray On
Hold the Exposure Button or switch as long as the acoustic signal can
be heard. Otherwise the exposure will be faulty and there will be an
error message on the Control Panel.
To Next Page
Loading...
