4. Cleaning and Maintenance
EzRay Air (Model: VEX-P300) User Manual 39
ENGLISH
4. Cleaning and Maintenance
4.1 Cleaning
Before cleaning the equipment, make sure to turn off the equipment.
The equipment surfaces can be cleaned with a soft cloth damped in an alcohol-
based, non-corrosive cleaning solution. If necessary, wipe off surfaces with
disinfectant.
If necessary, wipe off surfaces with disinfectant.
When cleaning the surfaces, make sure that the equipment is not
connected to the battery charger.
DO NOT expose the equipment to any liquids.
DO NOT use spray cleaner or disinfectant directly into the equipment
as this could cause a fire.
The soft cloth should be damp, but not dripping wet.
The cloths or wipes cannot be re-used.
To Next Page
Loading...
