Vatech EzSensor

2. Hardware Installation
2.2.2. EzSensor Driver Setup
This step is necessary for the installation of EzSensor. Calibration data for the EzSensor will be installed
along with the Windows device driver.
Step 1
Insert the EzSensor Driver
Installation CD in the CD-ROM.
Setup should start automatically.
If it does not, click Start > Run
and type D:\EzSensor\setup.exe
Step 2
The install program for ‘E-Woo
Intraoral Detector Software’ will
appear. Click the ‘Next’ button.
12