Vatech EzSensor

Appendix
3. Error Code
1. Code 0
● Message : USB device driver is not installed.
● Solution : Please install device driver again.
2. Code 1
● Message : USB driver can't detect connected sensor device. Check connection.
● Solution : Check and re-connect USB cable.
3. Code 2
● Message : USB device driver is not working properly.
● Solution : Re-install the driver.
4. Code 3
● Message : Capture program is already running.
● Solution : Please close other program.
5. Code 4
● Message : Detector's response time-out.
● Solution : Check and re-connect USB cable. Contact Customer Service.
6. Code 5
● Message : Data communication error.
● Solution : Re-connect USB cable.
7. Code 6
● Message : Data communication error.
● Solution : Re-connect USB cable.
8. Code 7
● Message : Canceled image capturing.
● Solution : User canceled image capture. Please try again.
42