Vauxhall COMBO - Automatic Light Control; High Beam; High Beam Assist

Lighting 111
Tail lights
Tail lights are illuminated together
with low/high beam and sidelights.
Automatic light control
When the automatic light control
function is switched on and the
engine is running, the system
switches between daytime running
lights and headlights automatically
depending on the external lighting
conditions and information given by
the wiper system.
Make sure the sensor is not blocked
3 77, 3 26.
Daytime running light 3 113.
Automatic headlight activation
During poor lighting conditions the
headlights are switched on.
Additionally, headlights are switched
on if the windscreen wipers have
been activated for several wipes.
Tunnel detection
When a tunnel is entered, headlights
are switched on immediately.
High beam
Push lever to switch from low to high
beam.
Pull lever to deactivate high beam.
High beam assist
Once activated, the high beam assist
switches high beam automatically on
and off depending on vehicle speed
and detected objects by the camera
in the windscreen. This provides the
best light distribution to the driver in
each situation while avoiding dazzling
other road users.
This feature automatically activates
the high beam at night when vehicle
is faster than 15 mph.
It switches automatically back to low
beam when:
● A sensor detects the lights of
oncoming or preceding vehicles.
● Driving in urban areas.
● The vehicle is slower than
9 mph.
● It is foggy or snowy.
● Front or rear fog lights are
switched on.