88 Instruments and controls
Power indicator gauge
The power indicator gauge informs
about the current energy situation of
the vehicle.
Charge : Battery is being charged
with energy resulting from
braking or deceleration of
the vehicle
Eco : An optimum in energy is
accessible in all driving
modes
Power : Vehicle is driven in a
dynamic driving style with
focus on performance
Engine coolant temperature
gauge
Displays the coolant temperature.
50 : engine operating temperature
not yet reached
90 : normal operating temperature
130 : temperature too high
Control indicator o illuminates if
coolant temperature is too high.
Switch off engine immediately.
Caution
If engine coolant temperature is
too high, stop vehicle, switch off
engine. Danger to engine. Check
coolant level.
Engine oil level monitor
The state of the engine oil level is
displayed in the Driver Information
Centre for a few seconds following
the service information after switching
on the ignition.
A proper state of engine oil level is
indicated by the message Oil level
correct.
If engine oil level is low, I flashes
and Oil level incorrect is indicated,
accompanied by C. Confirm engine
oil level by using the oil dipstick and
top up engine oil respectively.
Engine oil 3 306.
A fault of measurement is indicated
by the message Oil level
measurement invalid. Check engine
oil level manually by using the
dipstick.
To Next Page
Loading...
