314 Vehicle care
3. Detach the bulb from the bulb
socket and replace the bulb.
4. Insert the bulb socket into the
reflector housing.
5. Fit the protective cover on.
High beam (2)
1. Remove the protective cover by
pulling.
2. Disengage the spring clip from the
retainer by moving it to the
righthand side. Swivel the spring
clip downwards.
Withdraw the bulb socket from the
reflector housing.
3. Detach the bulb from the bulb
socket and replace the bulb.
4. Insert the bulb socket into the
reflector housing.
5. Fit the protective cover on.
To Next Page
