Vehicle care 327
4. Type A: Open sealant bottle and
lift the lid.
5. Type A: First, insert sealant bottle
into the compresor and align the
triangle symbols. Then, push
down sealant bottle and turn it to
the lock position.
Type B: Screw the compressor air
hose to the connection on the
sealant bottle.
6. Type B: Fit the sealant bottle into
the bracket on the compressor.
7. Set the compressor near the tyre
in such a way that the sealant
bottle is upright.
8. Unscrew valve cap from defective
tyre.
9. Screw the filler hose to the tyre
valve.
10. The switch on the compressor
must be set to J.
11. Connect the compressor plug to
the 12 V power outlet or cigarette
lighter socket 3 83.
To avoid discharging the vehicle
battery, we recommend to use the
tyre repair kit only when the
combustion engine is running or
when the electric engine is ready.
To Next Page
Loading...
