Vehicle care 341
retainers on the driver side.
Always check that the floor mats
do not interfere with the pedals.
● Use the floor mat with the correct
side up. Do not turn it over.
● Do not place anything on top of
the driver side floor mat.
● Use only a single floor mat on the
driver side.
Inserting and removing the floor
mats
The driver side floor mat is held in
place by two retainers.
To install the floor mat:
1. Move the seat backwards as far
as possible.
2. Align slots in the mat with the
retainers, as shown.
3. Push the mat to the floor.
Removing
1. Move the seat backwards as far
as possible.
2. Remove the mat.
To Next Page
