6. Plug in the vehicle plug of the
charging cable into the charging port
of the vehicle.
Charging status ð
page 103
The start of charging is indicated by the
green flashing of the status indicator at
the charging port and at the control box
of the charging cable if available.
Once charging, the vehicle plug will be
locked to the charging port and cannot be
disconnected while charging is active.
indicator illuminates.
Cancelling the charging process
Note
At public charging stations, the cancelling
and subsequent resuming of the charging
process may cause additional costs.
Once the charging process has started,
only the driver's door can be unlocked
without cancelling the charging process.
Therefore, activate the driver's door only
function in the vehicle personalisation.
Press on the remote control to cancel
the charging process at any time.
Press twice to cancel the charging
process at any time if the function driver's
door only is activated in the vehicle
personalisation.
Stop charging
The high-voltage battery is fully charged
if the status indicator on the charging port
permanently illuminates green.
1.
Unlock the vehicle before removing
the vehicle plug from the charging
port.
If the vehicle is already unlocked,
lock the vehicle and unlock it again.
2. Disconnect the vehicle plug of the
charging cable from the charging
port within 30 seconds after
unlocking.
Starting and operating
101
To Next Page
Loading...
