Neutral mode N
In this mode, the propulsion system does
not transfer torque to the wheels.
Automatic mode D
This mode is for normal driving.
Automatic mode B with one-pedal
driving
In this mode, vehicle speed is
significantly reduced by releasing the
accelerator pedal, without operating the
brake pedal.
Use B when driving down steep hills,
in deep snow, in mud or in stop-and-go
traffic.
Warning
In the case of extreme temperatures or
if the high-voltage battery is almost fully
charged, the brake force of the engine
braking may be temporarily reduced. If
the braking force is not sufficient, the
driver must be prepared to use the
brake pedal.
B can only be activated if D is selected.
Press button B.
To deactivate B, press button B.
Regenerative braking ð
page 85
Free wheeling
In certain situations, e.g., in an automatic
car wash etc., it is necessary that the
wheels can move freely when the engine
is switched off.
To enable free wheeling, the vehicle
must be stationary, the engine must be
running and the driver's door must be
closed.
1. Depress the brake pedal and select
N.
2. Within five seconds, depress and hold
the brake pedal, switch off ignition
and move the selector forwards or
backwards.
3. Release the brake pedal and switch
on ignition.
4. Depress and hold the brake pedal
and push the switch .
5. Release the brake pedal and switch
off ignition.
A message is displayed on the cluster
indicating that the wheels are unblocked
for the next 15 minutes.
To revert to normal operation, depress
and hold the brake pedal, switch on the
engine and select P.
Parking brake ð page 83
Automatic Transmission
The automatic transmission permits
automatic gear shifting (automatic mode)
or manual gear shifting (manual mode).
Starting and operating
87