Rear floor storage cover
The rear floor cover can be lifted and
removed. Use opening to raise the rear
floor cover and then remove it.
Double load floor
The double load floor can be inserted in
the load compartment in two positions:
● lower position above the rear floor
storage cover
● upper position interlocked into back
panel trim
To remove, use opening to raise the rear
floor cover and lift it up.
If mounted in the upper position, the
space between the load floor and the
spare wheel well cover can be used as
a storage compartment.
In this position, if the rear seat
backrests are folded forwards, an almost
completely flat load bay is created.
In the upper position, the double load
floor is able to withstand an equally
distributed maximum load of 60 kg.
In the lower position, the double load
floor is able to withstand the maximum
permissible load.
Lashing eyes
The lashing eyes are designed to secure
items against slippage, e.g. using lashing
straps or luggage net.
Roof Bars
For safety reasons and to avoid damage
to the roof, the vehicle approved roof
rack system is recommended. For further
information, contact your workshop.
104
Starting and operating
To Next Page
Loading...
