Do not exceed the maximum power
consumption of 120 W.
The 12 V power outlet is deactivated in
the event of low vehicle battery voltage.
Electrical accessories that are connected
must comply with the electromagnetic
compatibility requirements laid down in
DIN VDE 40 839.
Do not connect any current-delivering
accessories, e.g. electrical charging
devices or batteries.
Do not damage the outlet by using
unsuitable plugs.
Stop-start system
ð page 79
USB Port
The USB port provides 5 V.
Note
The sockets must always be kept clean
and dry.
Rear USB ports
The slot below the USB ports on the rear
side of the storage container is intended
to attach an accessory cup holder.
Wireless Phone Charger
This system allows wireless charging of
a portable device, such as a smartphone,
using the magnetic induction principle in
accordance with the Qi standard.
The portable device to be charged must
be compatible with the Qi standard,
either by design or by using a compatible
holder or shell.
A mat can also be used provided that
it is approved by the manufacturer. The
charging area is identified by the Qi
symbol.
The charger works with the engine
running and with the Stop & Start system
in STOP mode. Charging is managed by
the smartphone.
Charging
● With the charging area clear, place a
device in its centre.
44
Getting to know your vehicle
To Next Page
Loading...
