Simultaneously symbol illuminates
temporary as reminder.
If service is required in less than 600
miles, the remaining distance to the
next service due, the distance travelled
since the last service due or the
time period that remains to the next
service due is indicated for several
seconds. Simultaneously illuminates
permanently as reminder.
Overdue service is indicated by a
message on the cluster which indicates
the overdue distance. flashes and
then illuminates permanently until service
is executed.
Reset of service interval
After each service, the service indicator
must be reset to ensure proper
functionality. It is recommended to seek
the assistance of a workshop.
If service is executed by yourself, operate
as following:
● switch off ignition
● press and hold the button
● switch on ignition, the distance
indication begins a countdown
● when the display indicates =0, release
the button again
The symbol
disappears.
Retrieving service information
The status of the service information
can be retrieved at any time via the
Information Display. Press Check
in
the vehicle settings menu. The service
information is displayed for a few
seconds.
Information Display ð page 68
Service information ð page 53
Warning and control
indicator lights
The control indicators described are not
present in all vehicles. The description
applies to all instrument versions.
Depending on the equipment, the
position of the control indicators may
vary.
When the ignition is switched on, most
control indicators will illuminate briefly as
a functionality test.
The control indicator colours mean:
red: danger, important reminder
yellow: warning, information, fault
green: confirmation of activation
blue: confirmation of activation
white: confirmation of activation
grey: system paused, at least one
system limitation has been
detected
Overview
The numbers in the overview table
indicate what to do, when a control
indicator illuminates or flashes.
1: only for information
54
Dashboard instruments and controls
To Next Page
Loading...
