knob 2 (Fig. 11, 12). View «A» shows
the front seat arrangement for comfort-
able rest.
To let the rear passenger in and out
(VAZ 2113 and modifications), move up
lever 3 and tilt the front seat backrest
forward.
To increase the luggage space (7),
do the following (for VAZ 2113, VAZ
2114 and modifications):
— remove parcel shelf 8 and place it
along the rear wall of the boot (see
view «B» in Fig. 11);
— pull loop 5 and put the cushion
vertically.
— move lever 6 to the right, release
the backrest and fold it down. When
necessary, move the front seat forward;
Headrests 4 (Fig. 11, 12) are height
and tilt adjusted. They are held in posi-
tion by retainer springs.
The rear seat of VAZ 2115 can be
transformed to increase the luggage
compartment space for various car-
goes transportation. Fold the rear seat
as follows:
— pull loop 2 (Fig. 13) to place cush-
ion 1 vertically;
— remove headrests, then shift
lever 3 to the right, release backrest 4
and place it as shown in the illustration.
When necessary, move the front seats
forward.
STEERING RAKE
ADJUSTMENT
Following adjustment of the seat
position, tilt the steering column to a
position most suitable for comfortable
driving. Move lever 1 (Fig. 14) down,
then select a desired tilt angle of the
steering column and shift the lever up
to lock the column in this position.
SEAT BELTS AND AIRBAG
In order to fasten a seatbelt, slip
tongue 1 (Fig.15) into buckle 2 to hear
a click. Check to see, that the straps
are not twisted.
To unfasten the belt, push button 3
of the buckle.
The passengers, sitting in the rear,
fasten their belts similarly. The occu-
10
Fig. 13. VAZ-2115 rear seat
transformationFig. 12. Front seat
To Next Page
Loading...
