12
You may select among three posi-
tions (I, II or III) of sun visors 3 depend-
ing on the sun light.
The passenger’s sun visor may
optionally feature a vanity mirror.
The interior light (4) goes on auto-
matically as the vehicle door opens
(courtesy light) and goes off 10 sec-
onds after the door closing or after the
ignition key is switched to the «Ignition»
position.
When the doors are closed the inte-
rior light can be switched on/off by
pushing its lens at the side.
The reading lamp is intended for
spotlighting individual objects. To
switch on the reading light, twist lamp
casing ring 1 (Fig. 18) clockwise. The
lamp (2) beam axis can turn over 30° in
all directions. To switch off the reading
light twist lamp casing ring counter-
clockwise.
INSTRUMENTS AND
CONTROLS
The location of instruments and con-
trols is shown in Fig. 19.
1 — Side demister register.
2 — Turn indicators and main/ low
beam stalk switch.
3 — Interior ventilation and heat-
ing system side registers.
4 — Inspection lamp socket.
5 — Bonnet release handle.
6 — Headlight hydraulic adjuster
with manual adjustment.
Rotating the knob, adjust the head-
light beam angle to match the vehicle’s
load and avoid dazzling the drivers of
the on-coming traffic. Read the adjuster
knob positions as follows:
1 — driver only;
Fig. 17. Interior (detail)
Fig. 18. Reading lamp
Fig. 16. Exterior rearview mirror
adjustment
To Next Page
Loading...
