BIKE button functions
Maximum speed
for the current trip
The maximum speed is specified to two decimal places.
Average speed
for the current trip
The average speed is specified to two decimal places.
Section time
The VDO M4 WL has a trip section counter.
The trip section counter is like a stopwatch.
If the trip section counter is running, the section time is
recorded, as on a stopwatch.
When the trip section counter is running,
the section distance is also recorded.
The trip section counter is started and stopped by pressing
the BIKE + SET buttons (simultaneously press and both
buttons – do NOT hold).
ATTENTION: the trip section counter stops automatically
when the speed is zero.
A detailed description of the trip section counter can be found
on page 42.
Section distance
Shows the distance travelled while the trip section counter is
activated.
To Next Page
Loading...
Need help?
General
