BIKE button functions
Navigator
The navigator is a second, completely independent
trip distance counter.
The navigator is used to measure partial trip sections.
The navigator is particularly helpful when riding a route
shown in a road book.
The navigator can:
– be reset to zero as often as desired and independently
of the trip distance counter
– be preset to a specific value
– count forwards or backwards from this value
Information on how to operate the navigator can be found
on page 40.
Temperature
The VDO M4 WL has a temperature indicator.
The temperature is displayed in increments of 0.1 degrees.
Time
The current time is displayed in 24 H or 12 H mode.
Information on how to set the time can be found on page 26.
To Next Page
Loading...
