Notes Manual
- 10 - Version 1.3 © Vector Informatik GmbH
Note: You will find a detailed description of Vector Hardware Config in the online
help (Help | Contents).
2.4 Further notes
2.4.1 Measurement applications
Compatible software The device can be run with several applications from Vector (e.g. CANape, CANoe)
or with measurement applications from other companies. Therefore the device must
have a related license. A license for applications based on the
XL Driver Library is not
required.
2.4.2 Device Manager
Windows 2000 In order to start the Device Manager under Windows 2000, click on:
Start | Settings | Control Panel | System | Hardware | Device Manager.
Windows XP Under
Windows XP and Windows Vista respectively the way in which the Device
Manager is started depends on which view is configured:
¼ Category view under XP:
Start | (Settings) | Control Panel | Performance and Maintenance | System |
Hardware | Device Manager
¼ Category view under Vista:
Start | (Settings) | Control Panel | Performance and Maintenance | System |
Device Manager
¼ Classic view under XP:
Start | (Settings) | Control Panel | System | Hardware | Device Manager
¼ Classic view under Vista:
Start | (Settings) | Control Panel | System | Device Manager
2.4.3 Power Manager
Timing requirements Many desktop PCs have power managers which block the CPU for a specific time.
This impairs accuracy of the time system. If your application has stringent timing
requirements (e.g. time-driven sending of messages or time-driven evaluations), you
must deactivate these power managers.
Power management settings may be contained:
¼ in the BIOS setup,
¼ on the Control Panel of
Windows 2000/XP/Vista (e.g. Power options).
No further mention will be made of the power manager in this document.
To Next Page
Loading...