Windows Vista Manual
- 34 - Version 1.3 © Vector Informatik GmbH
5.2 Driver update
The installation process described here is necessary if an older version of the driver is
already installed on your computer.
You will find the version number of the installed driver under Control Panel | Vector
Hardware. See the section Hardware | <device>.
1. Connect the device with the PC or insert it in an empty slot while it is switched off
and switch the PC on afterwards.
2. Start the
Device Manager.
Device Manager
3. Select the device with a double click. You will find the device either in CAN-
Hardware
Vector-Hardwareor in . Afterwards a dialog appears.
4. Choose the
Driver tab for the device.
5. Select [Update Driver...].
To Next Page
Loading...