Vector CANcaseXL - Driver update

Manual Windows 2000
© Vector Informatik GmbH Version 1.3 - 15 -
3.2 Driver update
The installation process described here is necessary if an older version of the driver is
already installed on the computer. You will find the version number of the installed
driver under Control Panel | Vector Hardware. See the section Hardware |
<device>.
1. Connect the device with the PC or insert it in an empty slot while it is switched off
and switch the PC on afterwards.
2. Start the Device Manager.
Device Manager
Driver details 3. Select the device with a double click. You will find the device either in CAN-
Hardware
Vector-Hardwareor in . Afterwards a dialog appears.
4. Choose the
Driver tab for the device.
5. Select [Update driver...].