Serial Interface Manual
• TLS2 Monitoring Systems
Part No. 577013-767, Revision H 10
Function Code: 010 Version 1
Function Type: Computer Mode Autodial Hang-up
Command Format:
Display: <SOH>S01000
Computer: <SOH>s01000
Typical Response Message, Display Format:
<SOH>
S01000
22-05-01 14:54
<ETX>
Typical Response Message, Computer Format:
<SOH>s01000YYMMDDHHmm&&CCCC<ETX>
Notes:
1. YYMMDDHHmm - Current Date and Time
2. This command ends the current autodial session for this port
and clears any active autodial alarms on the port
3. && - Data Termination Flag
4. CCCC - Message Checksum
To Next Page
Loading...
