Veeder-Root TLS2 - Page 137

Serial Interface Manual
• TLS2 Monitoring Systems
Part No. 577013-767, Revision H 134
Function Code: 8CA Version 4
Function Type: Set Email Mail Server IP Address
Command Format: Inquire:
Display: <SOH>S8CA00aaa.aaa.aaa.aaa <SOH>I8CA00
Computer: <SOH>s8CA00AAAAAAAA <SOH>i8CA00
Notes:
1.aaa.aaa.aaa.aaa - Email Mail Server IP Address (decimal)
2. AAAAAAAA - Email Mail Server IP Address (ASCII hex, two digits
represent each field)
Typical Response Message, Display Format:
<SOH>
I8CA00
JAN 31, 2008 9:02 AM
TCPIP SETUP PARAMETERS
MAIL SERVER ADDRESS: 10.2.1.50
<ETX>
Typical Response Message, Computer Format:
<SOH>s8CA00YYMMDDHHmmvAAAAAAAA&&CCCC<ETX>
Notes:
1. YYMMDDHHmm - Current Date and Time
2. v - Valid Data Flag
0 = Not Valid
1 = Valid
3. AAAAAAAA - Email Mail Server IP Address (ASCII hex, two digits
represent each field)
4. && - Data Termination Flag
5. CCCC - Message Checksum