Serial Interface Manual
• TLS2 Monitoring Systems
Part No. 577013-767, Revision H 50
Function Code: 504 Version 1
Function Type: Set System RS-232 Security Code
Command Format: Inquire:
Display: <SOH>S50400aaaaaa <SOH>I50400
Computer: <SOH>s50400aaaaaa <SOH>i50400
Typical Response Message, Display Format:
<SOH>
I50400
22-05-01 14:58
232 SECURITY CODE
PORT SECURITY CODE STATUS
1 000000 DISABLED
2 000000 DISABLED
<ETX>
Typical Response Message, Computer Format:
<SOH>i50400YYMMDDHHmmaaaaaa&&CCCC<ETX>
Notes:
1. YYMMDDHHmm - Current Date and Time
2. aaaaaa - Security Code (6 ASCII characters from 20 Hex - 7E Hex)
3. && - Data Termination Flag
4. CCCC - Message Checksum
To Next Page
Loading...
