Veeder-Root TLS2 - Page 61

Serial Interface Manual
• TLS2 Monitoring Systems
Part No. 577013-767, Revision H 58
Function Code: 51B Version 1
Function Type: Set Start/End Daylight Saving Date and Time
Command Format: Inquire:
Display: <SOH>S51BttMMWDHHmm <SOH>I51Btt
Computer: <SOH>s51BttMMWDHHmm <SOH>i51Btt
Notes:
1. YYMMDDHHmm - Current Date and Time
2. tt - Start or End Time Indicator
01=Start Date & Time
02=End Date & Time
3. MMWDHHmm - Date & Time
MM=Month (01-12)
W=Week of Month (1-6)
D=Day of Week (1=Monday, 2=Tuesday, .. 7=Sunday)
HH=Hour (00-23)
mm=Minute (00-59)
Typical Response Message, Display Format:
<SOH>
I51B00
22-05-01 15:02
DAYLIGHT SAVING TIME
START DATE APR WEEK 1 SUN 2:00 AM
END DATE OCT WEEK 4 SUN 2:00 AM
<ETX>
Typical Response Message, Computer Format:
<SOH>i51BttYYMMDDHHmmMMWDHHmm&&CCCC<ETX>
Notes:
1. YYMMDDHHmm - Current Date and Time
2. tt - Start or End Time Indicator
00=in computer format returns only Start Date & Time
01=Start Date & Time
02=End Date & Time
3. MMWDHHmm - Date & Time
MM=Month (01-12)
W=Week of Month (1-6)
D=Day of Week (1=Monday, 2=Tuesday, .. 7=Sunday)
HH=Hour (00-23)
mm=Minute (00-59)
4. && - Data Termination Flag
5. CCCC - Message Checksum