Serial Interface Manual
• TLS2 Monitoring Systems
Part No. 577013-767, Revision H 57
Function Code: 51A Version 1
Function Type: Set Enable/Disable Auto Daylight Saving Time
Command Format: Inquire:
Display: <SOH>S51A00f <SOH>I51A00
Computer: <SOH>s51A00f <SOH>i51A00
Typical Response Message, Display Format:
<SOH>
I51A00
22-05-01 14:59
DAYLIGHT SAVING TIME
DISABLED
<ETX>
Typical Response Message, Computer Format:
<SOH>i51A00YYMMDDHHmmf&&CCCC<ETX>
Notes:
1. YYMMDDHHmm - Current Date and Time
2. f - Daylight Saving Time Flag
0 = Disabled
1 = Enabled
3. && - Data Termination Flag
4. CCCC - Message Checksum
To Next Page
Loading...
