Vega MINITRAC 31 User Manual

35
6Setupwiththedisplayandadjustmentmodule
MINITRAC 31 • Foundation Fieldbus
41782-EN-211203
6.3.2 Additional adjustments
Whenaresetiscarriedout,allsettings(withonlyafewexceptions)
are reset. The exceptions are: PIN, language and SIL.
Thefollowingresetfunctionsareavailable:
Basic settings: Resetting of the parameter adjustments to default
valuesatthetimeofshipment.Order-specicsettingsaredeleted.
Default settings: Resetting of the parameter adjustment like under
" Basic settings". In addition, special parameters are reset to default
values.Order-specicsettingsaredeleted.
Peak values of measured value: Resetting of the parameter adjust-
ments in the menu item " Setup" to the default values of the respec-
tiveinstrument.Order-specicsettingsremainbutarenottakenover
into the current parameters.
Peak values of temperature: Resetting of the measured min. and
max. temperatures to the actual measured value.
Thefollowingtableshowsthedefaultvaluesoftheinstrument.The
values apply for the application " Level". First of all you have to select
the application.
Depending on the instrument version, not all menu items may be
availableortheymaybedierentlyassigned:
Reset

Vega MINITRAC 31 Specifications

General

Brand	Vega
Model	MINITRAC 31
Category	Accessories
Language	English