Vega MINITRAC 31 User Manual

42
6Setupwiththedisplayandadjustmentmodule
MINITRAC 31 • Foundation Fieldbus
41782-EN-211203
Valuepairsthatarenotyetcomplete,e.g.duetoamissingdensity
determination,canbeeditedlaterwiththefunction"Setup - Lineari-
zation" under the item " Change/Edit".
A maximum of 32 linearisation points is possible.
Note:
If you cannot change the medium during the adjustment process, it
ispossibletocarryoutthelinearizationwithonlyonepoint.However,
youshouldenterfurtherlinearizationpointslater,ifpossible.
•
Showdiagram
Thismenuitemisonlyavailableifalinearizationwasalreadycarried
out.
•
Showtable
Inthismenuitemyoucanshowtheindividualvaluepairsofthe
linearization.
•
Linearization-Delete
Youcanalsodeleteindividuallinearizationpoints.Enterthenumber
ofthepointyouwanttodelete.
•
Linearization-Modify
Youcanalsomodifyindividuallinearizationpoints.
After editing, you have to activate the complete value pair so that the
linearizationpointwillbeeective.

Vega MINITRAC 31 Specifications

General

Brand	Vega
Model	MINITRAC 31
Category	Accessories
Language	English