Vega VEGAPULS 31 - Extended Parameter Functions

33
7 Set up with the integrated display and adjustment unit
VEGAPULS 31 • Two-wire 4 … 20 mA/HART
57820-EN-191014
7.4.2 Extended functions
In the menu item "Display value"youdenetheindicationofthe
measuredvaluesonthedisplayasllingheight,distance,percent,lin.
percent or scaled.
In the menu item "Scaling
"youdenehowthelevelvalueisshown
on the display. This includes the scaling size, unit and format as well
as the assignment to 0 % and 100 % of the measured value. Scaling
makes it possible, for example, to display the volume in m³.
This menu item enables the setting of the requested national lan-
guage for the display.
The following languages are available:
German, English, Spanish, French, Chinese, Japanese, Portuguese,
Dutch, Italian, Russian, Polish, Czech
In this menu item, you can change the factory-preset Bluetooth ac-
cess code to your personal Bluetooth access code.
Note:
The individual preset Bluetooth access code of the device can be
found on the supplied information sheet "PINs and Codes". If this is
changed by the user and is no longer available, access is only pos-
sible via the emergency Bluetooth unlock code on the information
sheet "Emergency unlock codes" also supplied.
For instruments without Bluetooth function, this menu item displays
"Instrument without Bluetooth".
In the menu item "Protection of the parameter adjustment" you protect
the sensor parameters against unwanted or unintentional changes by
entering a device code.
Displayed value
Scaling
Menu language
Bluetooth access code
Protection of the param-
eterization