Vemco VR60 - V10 DIRECTIONAL HYDROPHONE (50-80 Khz); VH32 OMNIDIRECTIONAL HYDROPHONE (25-35 Khz)

36
V10 DIRECTIONAL HYDROPHONE (50-80kHz)
OPERATING
FREQUENCY:
50 to 80 kHz.
OPERATING DEPTH: 5 meters
POWER SUPPLY: 12 VDC 5 mA (supplied by receiver)
DIMENSIONS: 82 mm x 95 mm x 35 mm
CASE MATERIAL: Machined solid block of Aluminum.
CABLE: 6.5mm diameter polyurethane jacket, twisted shielded pair. Standard
length 10 meters; extra length available with Option 04.
CONNECTOR: AMPHENOL MS-3106A-10SL-3S.
APPLICATION: The V10 is used for directional tracking. It can be deployed on a hull
mount, strut mount ,or on a V-Fin towed depressor.
FREQUENCY (kHz) 50 60 70 80
SENSITIVITY (dB re 1V/uPascal @ 1m) -144 -141 -142 -145
NOISE FLOOR (dB re 1 uPascal/SqrtHz) 21 20 21 23
HORIZONTAL ACCEPTANCE ANGLE - BANDWIDTH
(degrees, between 3 dB points)
30 26 22 18
VERTICAL ACCEPTANCE ANGLE - BANDWIDTH
(degrees, between 3 dB points)
150 150 150 150
VH32 OMNIDIRECTIONAL HYDROPHONE (25-35kHz)
OPERATING
FREQUENCY:
25 to 35 kHz (3dB bandwidth).
BEAM PATTERN: Omnidirectional +/- 2dB.
PRE-AMPLIFIER: 50 dB low noise internal amplifier.
SENSITIVITY: -148 dB re 1 V/uPascal.
NOISE FLOOR: 27 dB re 1 uPascal/SqrtHz. At 32 kHz.
POWER SUPPLY: 12V DC, 5 mA (supplied by receiver).
HYDROPHONE SIZE: 32mm DIA x 100mm length cylinder.
CABLE: 6.5mm dia polyurethane jacket twisted shielded pair with drain wire.
Standard length 5 meters; extra length available with Option 04.
CONNECTOR: AMPHENOL MS-3106A-10SL-3S.