Vemer Memo DW E User Manual

English
- 10 -
User manual memo DW E
MANUAL OPERATION
Manual operations are reachable from the
normal operational status in which the
display assumes an appearance similar to
the following:
Manual switching on/off
Briefly pressing keys “C1” allows
switching The achieved status is
maintained until the next programmed
event.
Casual on/off switchings
It is possible to activate casual output
switching.
Activation brings the output to the on
status and shall then be followed by on/
off switching with casual periods and
duty-cycles (the default minimum period
is 1 minute and the maximum 5 minutes:
such values can in any case be changed
in the settings menu)
Hold keys “C1” and “Ok” down
simultaneously for 3 seconds to activate
the function.
On confirmation of activation, under the
output status indication appears the
symbol
.
Pressing keys “C1” and “Ok” again for 3
seconds deactivates the function.
The relay is set to off status.
Lock output switching (Lock)
It is possible to activate the function
which allows all the switchings of one
output to be locked. In this way all the
programmes are locked (including the
holiday programme and the other manual
switchings) and the output is maintained
in its current status until manual
unlocking.
C1 C2
R
Ok
3 seconds

Vemer Memo DW E Specifications

General

Brand	Vemer
Model	Memo DW E
Category	Timer
Language	English